1 preface and general information, 1 conventions used, Conventions used – Lenze Drive Server Bus server S7 getting started User Manual
Page 5: 1preface and general information, Busserver s7
Busserver S7
L
66
Busserver S7 DE/EN 1.0
1
Preface and general information
The
DriveServer is a software which provides easy integration of drives into open automation
struc tures based o n OPC (OLE for Process Control ).
When used together with the
bus server S7, you can access drives which are connected via
PROFIBUS-DP and controlled via a Siemens SIMATIC S7 PLC.
The following figure shows the architecture of such a system:
DriveServer
Bus server S7
Lenze function block
MPI
PROFIBUS-DP
Siemens SIMATIC S7
•
A bus system (MPI, Ethernet or PROFIBUS) is used to connect the PC with the
DriveServer to
the PLC. The DriveServer uses the
bus server S7 as OPC bus server.
•
The S7 program uses special Lenze function blocks via which the DriveServer can access the
drives through the PLC as if the PLC was not connected.
•
The drives are connected to the PROFIBUS master of the PLC via PROFIBUS-DP.
1.1
Conventions used
This Manual uses the following conventions to distinguish between different types of information:
Type of information
Marking
Example
Names of dialog boxes
italics
The Options dialog box...
Parameter identifiers
ta cs
The parameter PB_Address...
Control elements (buttons, input
fields, checkboxes, etc.)
bold
Click the OK button to...
STEP7 block identifier
The data block DB80...
Menu commands
Use the command
Copy to ...
If the execution of a function requires several
commands, the individual commands are separated
by an arrow:
Select
FileWOpen to...
Keyboard commands
Use
If a command requires a combination of keys, a ”+”
is placed between the key symbols:
Use
Program listings
Courier
TimerNr:=T1
Keywords
Courier bold
e
:
Show/Hide Bookmarks