Lenze 931K - Manual (Page 66)

Appendix
Table of parameter numbers (PNU)
10
l
66 KHB 13.0004−EN 2.1
10 Appendix
10.1 Table of parameter numbers (PNU)
ƒ The PNUs are numerically sorted in ascending order to form a "reference book".
ƒ How to read the table:
Column Abbreviation Meaning
PNU XXXX Parameter number XXXX
1 Subindex 1 of PNU XXXX (PNU XXXX.1)
2 Subindex 2 of PNU XXXX (PNU XXXX.2)
Name Name of the PNU
Possible settings
Lenze Lenze setting (value at delivery or after restoring the delivery state)
Selection 1 {%} 99 Minimum value {unit} maximum value
Characteristics
Object type REC Record
ARR Array, composed type (field)
VAR Variable
Data type UINT8 Unsigned integer, 1 byte without sign
UINT16 Unsigned integer, 2 bytes without sign
UINT32 Unsigned integer, 4 bytes without sign
INT8 Integer, 1 byte with sign
INT16 Integer, 2 bytes with sign
INT32 Integer, 4 bytes with sign
Access RO Read only
RW Read/write
WO Write only
Description Short, important explanations
PNU Name Possible settings Characteristics
Lenze Selection Description
930 0 Operating Mode Ċ UINT16 RO Ċ
00
h
Speed control Reading−out of the operating
mode.
10
h
Positioning
967 0 Control word 1 0 Ċ UNIT16 RW Ċ
Control of the device
functions of the controller
968 0 Status word 1 0 Ċ UNIT16 RO Ċ
Current state of the
controller
971 0 Transfer into a
non−volatile
memory
0 Ċ UNIT16 RW Ċ
0 No action Save current parameter set
and all position data sets
Also saves position data set
68.
1 Save
2 ... 655
35 Reserved