Lenze 931K - Manual (Page 6)

About this documentation
Document history
1
l
6 KHB 13.0004−EN 2.1
1 About this documentation
Contents
This documentation contains descriptions for PROFIBUS with servo inverters of the 931
series.
)
Note!
This documentation completes the mounting instructions coming with the
931 servo inverter and the corresponding hardware manual.
The mounting instructions and the hardware manual contain safety
instructions which must be observed!
ƒ The features of the PROFIBUS−DP for servo inverters of the 931 series are described
in detail.
ƒ Typical applications are illustrated by use of examples.
ƒ Furthermore, this documentation contains:
– the most important technical data for PROFIBUS communication;
– information on the installation and commissioning of the PROFIBUS network;
– information on the PROFIBUS data transfer, PROFIBUS monitoring functions,
communication−relevant parameters, and different operating modes.
The theoretical connections are only explained as far as required for understanding the
PROFIBUS communication for servo inverters of the 931 series.
All trade names listed in this manual are trademarks of their respective owners.
Validity information
The information given in this documentation is valid for servo inverters of the 931 series.
Target group
This documentation addresses to all persons designing, installing, commissioning, and
setting the servo inverters of the 931 series.
I
Tip!
Documentation and software updates for further Lenze products can be found
on the Internet in the "Services & Downloads" area under
http://www.Lenze.com
1.1 Document history
Material number Version Description
.Bò* 2.1 07/2010 TD34 Textual supplement to chapter 4.1 and 5.1
13336309 4.0 07/2010 TD34 Extended by the servo inverter 931K, general
revision
13201464 1.0 06/2007 TD23 First edition