Lenze HMI for visualisation / with control technology - Manual (Page 75)

Operation
Access EL 1xx via server functionality
Telnet Server − Manage files at the Windows Command Prompt
8
l
75 LDCDS−EL100 EN 9.0
8.4.4 Telnet Server − Manage files at the Windows Command Prompt
The Teletype Network Server (Telnet Server) is based on a client−server protocol on TCP/IP
level. The server can be accessed via Telnet client. A Telnet client is e.g. the Windows
Command Prompt.
File or folder functions such as Create, Copy, Move To, Delete, etc. can be executed via
Telnet connection.
Prerequisite:
ƒ The EL 1xx is switched on and connected to the network/internet ( ¶ 38).
ƒ The access to the server has been enabled on the EL 1xx (
¶ 72).
ƒ A user and a password have been created on the EL 1xx (
¶ 73).
How to proceed:
1. Click Start
® Execute on your PC.
2. Enter the following address: Telnet IP Address
IP Address: The EL 1xx IP address will be displayed if you double−click the network
symbol in the status bar of your EL 1xx.
3. Enter the User Name in the subsequent dialogue box ( ¶ 73) and press Enter.
4. Enter the Password (
¶ 73) and press Enter.
The connection will be established.
Enter help to obtain a list of the commands available.
Enter exit to close the connection.