Lenze HMI for visualisation / with control technology - Manual (Page 50)

Operation
Control Panel Applets
Server
8
l
50 LDCDS−EL100 EN 9.0
8.2.5 Server
EL100−027
Find more information later in this chapter (
¶ 72).
8.2.6 Fieldbus
EL100−028
This Applet is only relevant for an EL1xx CAN. It has no function in an EL1xx MPI.
EL1xx CAN Device Node: EL1xx node address within a CAN fieldbus network.
Baud Rate: Transmission speed of the fieldbus. The baud rate must be identical for each
fieldbus node within the same network. The fieldbus parameters are set according to the
baud rate.