Lenze HMI for visualisation / with control technology - Manual (Page 60)

Operation
Creating a PLC sample program
Create sym file
8
l
60 LDCDS−EL100 EN 9.0
8.3.4 Create sym file
A sym file is required if the visualisation, e.g. VisiWinNet
â
Smart is to access the PLC
program. A sym file contains all variables and declarations of the PLC program.
How to proceed:
1. Open the menu Project in the PLC Designer and select the menu item Options.
The "Options" dialogue will be opened.
2. Select the "Symbol configuration" category from the "Options" dialogue.
3. Select the Dump symbol entries control field and click the Configure symbol file
button.
The "Set object attributes" dialogue will be opened.