Lenze HMI for visualisation / with control technology - Manual (Page 36)

Electrical installation
Wiring
EL 1xx ECO (PLC)
6
l
36 LDCDS−EL100 EN 9.0
Description Connection type Cable type
CAN bus connection
Pin 1: CAN−GND (CG)
Pin 2: CAN−LOW (LO)
Pin 3: CAN−SHIELD
Pin 4: CAN−HIGH (HI)
Pin 5: Not assigned
5−pole Phoenix Combicon
socket
CAN cable acc. to ISO 11898−2
with Phoenix Combicon plug,
MSTB 2.5 / 5−STF−5.08
EL100−011
CAN cable shield connection via cable clamp on the back of the device:
EL100−033
Cable fixing and strain relief
Fix the cable bundles on the back of the EL 103 using cable ties.
EL100−034