Lenze Controller-based Automation - Manual (Page 55)

Lenze · Controller-based Automation - Visualisation · System Manual · DMS 1.5 EN · 04/2014 · TD17
55
6 Remote maintenance and diagnostics
6.6 Web server/»WebConfig«
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
6.6 Web server/»WebConfig«
The Lenze controllers, IPCs, and HMIs are provided with an integrated web server. The web server
makes it possible to parameterise the devices via »WebConfig«.
• The controller, IPC, and HMI parameters can be displayed/altered via web browser.
• In order to parameterise a controller, IPC, or HMI in a web-based fashion, a remote connection
(via Ethernet by specifying the IP address) to the desired device has to be established.

Further information on how to redirect screen contents can be found in the following
documentation:
"HMI EL 1xx" device series:
• HMI EL 100 with Windows® CE - HMI for visualisation/with control technology
Controller 3200 C / p300 / p500 :
• Controller - Parameter setting & configuration