Lenze Controller-based Automation - Manual (Page 23)

Lenze · Controller-based Automation - Visualisation · System Manual · DMS 1.5 EN · 04/2014 · TD17
23
4 System description
4.2 System components
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
»VisiWinNET®« Standard Client/Server (C/S)
This runtime system for Windows® XP as client/server system offers the whole functional range of
the »VisiWinNET®« standard. However, all information used commonly is managed centrally on one
server.
So-called "Terminal Clients" serve as clients. They are simple Industrial PCs and HMIs under
Windows® CE or Windows® XP without a special runtime software, to which only the visualisation
application must be imported.
As an alternative, "Thin Clients" can also be used, which do not require any further installation, since
the application completely runs in the server in this case.
The following Lenze devices are suitable for the use as server:
• Industrial PCs:
• Embedded Line EL 1800 - 9800
• Command Station CS 5800 - 9800
• Cabinet Controller 3231 C/3241 C (with an external monitor panel/display)
The following Lenze devices are suitable for the use as client:
• Controller:
• Panel Controller p300/p500
• Cabinet Controller 3231 C/3241 C (with an external monitor panel/display)
• Industrial PCs:
• Embedded Line EL 1800 - 9800
• Command Station CS 5800 - 9800
• Control cabinet PC CPC 2800
• HMIs:
• EL 100
• EL 100 PLC
• Thin clients:
• Embedded Line EL 1800 - 9800 TC
• Command Station CS 5800 - 9800 TC