Lenze Controller-based Automation - Manual (Page 26)

4 System description
4.2 System components
26
Lenze · Controller-based Automation - Visualisation · System Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.2.4 Field devices
The following field devices are supported:
• Inverter:
• i700 servo inverter
• Inverter Drives 8400 / 8400 motec / 8400 protec
• Servo Drives 9400 Highline
• ECS servo system
• 8200 vector frequency inverter
• 9300 servo inverters
• Further field devices:
• I/O system 1000
• I/O system IP20 compact/modular
• Other devices for which an applicable device description file is available.
• Control systems:
• Logic & Motion
• Siemens Simatic® S7 300/400
• VIPA
• SAIA
• Other control systems for which an OPC server or a »VisiWinNET®« direct driver is available.
Basically, two different scenarios with external control systems must be distinguished for the data
to be visualised. This may lead to restricted access possibilities.

More information relating to the system structure and the control system (Logic &
Motion) can be found in the following sets of documentation:
• "PC-based Automation" system manual (control technology V2.x)
• "Controller-based Automation" system manual (control technology V3.x)