Lenze Controller-based Automation - Manual (Page 21)

Lenze · Controller-based Automation - Visualisation · System Manual · DMS 1.5 EN · 04/2014 · TD17
21
4 System description
4.2 System components
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
4.2.3.2 "Visu" runtime software
The "Visu" runtime software is not pre-installed on the Lenze Industrial PCs, but is loaded to the IPC
together with the visualisation application. By means of »VisiWinNET®«, the program parts
required are automatically compiled.
If you use the »VisiWinNET®« compact runtime software, the download is carried out directly from
»VisiWinNET®«. In the case of the other runtime variants, »VisiWinNET®« creates a setup file which,
apart from the actual runtime software, also contains the complete visualisation application, which
must be installed on the respective target system.
Depending on the target system/operating system which is to be used for the visualisation process,
various versions of the runtime software with different functional ranges are provided.
All visualisation applications are executed within a runtime
environment (runtime). The licence required for this purpose
depends on the hardware operating system.