Lenze Controller-based Automation - Manual (Page 5)

Lenze · Controller-based Automation - Visualisation · System Manual · DMS 1.5 EN · 04/2014 · TD17
5
1 About this documentation
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
More technical documentation for Lenze components
Further information on Lenze products which can be used in conjunction with Controller-based
Automation can be found in the following sets of documentation:

Tip!
Current documentation and software updates with regard to Lenze products can be found
in the download area at:
www.lenze.com
Target group
This documentation addresses to all persons who want to be provided with an overview of PC-based
visualisation with a Lenze Industrial PC (IPC)/controller.
Information on validity
The information in this documentation applies to the Lenze automation system.
"Controller-based Automation" (from software version 3.x):
• Panel Controller p300/p500
• Cabinet Controller 3231 C/3241 C (with an external monitor panel/display)
"PC-based Automation" (from software release 2.x):
• HMI series EL 100
• Industrial PCs: EL 1800-9800, CS 5800-9800 and CPC 2800
Mounting & wiring Symbols:
 Mounting instructions
• Controller
• Communication cards (MC-xxx)
• I/O system 1000 (EPM-Sxxx)
• Inverter, Servo Drives
• Communication modules

 Printed documentation
Online help in the Lenze Engineering
Tool (also available as PDF file at
www.lenze.com .)
 Operating instructions
• Controller
• Servo system ECS (ECSxE, ECSxM)
Sample applications/Using application templates

Online help/software manuals
• Application Sample i700
• Application Samples
• ApplicationTemplate
Parameterisation, configuration, commissioning

Online help/reference manuals
• Controller
• Inverter, Servo Drives
• I/O system 1000 (EPM-Sxxx)
 Online help/communication manuals
• Bus systems
• Communication modules
 Operating instructions
• Servo system ECS (ECSxE, ECSxM)