Lenze Controller-based Automation - Manual (Page 22)

4 System description
4.2 System components
22
Lenze · Controller-based Automation - Visualisation · System Manual · DMS 1.5 EN · 04/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
»VisiWinNET®« Compact CE
This runtime system for Windows® CE systems only requires a small amount of memory space and
is specially designed for systems with a lower processor power. Typical scopes of application are the
machine-oriented operation and monitoring with low demands with regard to the visualisation.
They are used in stand-alone applications and integrated control systems.
The following Lenze devices can be used:
• Controller:
• Panel Controller p300/p500
• Cabinet Controller 3231 C/3241 C (with an external monitor panel/display)
• Industrial PCs:
• Embedded Line EL 1800 - 9800
• Command Station CS 5800 - 9800
• Control cabinet PC CPC 2800
• HMIs:
• EL 100
• EL 100 PLC
»VisiWinNET®« Compact XP
This runtime system for Windows® XP Embedded systems only requires a small amount of memory
space and is specially designed for systems with a lower processor power. Typical scopes of
application are the machine-oriented operation and monitoring on Industrial PCs, where
customised applications run alongside with the visualisation software. They are used in stand-alone
applications.
The following Lenze devices can be used:
• Cabinet Controller 3241 C (with an external monitor panel/display)
• Industrial PCs:
• Embedded Line EL 1800 - 9800
• Command Station CS 5800 - 9800
• Control cabinet PC CPC 2800
»VisiWinNET®« Standard XP
This runtime system for Windows® XP or Windows® XP Embedded is designed for a medium to high
performance class. It is used in stand-alone applications.
The following Lenze devices can be used:
• Cabinet Controller 3241 C (with an external monitor panel/display)
• Industrial PCs:
• Embedded Line EL 1800 - 9800
• Command Station CS 5800 - 9800
• Control cabinet PC CPC 2800