Leica Biosystems ST5020 - Manual (Page 19)

19 Leica ST5020
Fig. 8
Instrument rear panel
water in-/outlets
4. Setting up the instrument
10
11
7
12
Fig. 7
8
9
10
Instrument rear panel
- tap water inlets
• Screw tap water inlet hose (7 in Fig. 8 ) for
tap water stations 8 - 12 onto water tap and
insert the other end into inlet (8 in
Fig. 7 ) .
• If station no. 7 ( Fig. 3 ) will also be used as a
tap water station, connect a second tap
water inlet hose (optional accessory) to inlet
(9).
Inlet (9) only provides water (or any
other medium supplied via a sepa-
rate connection) to station no. 7. To
use station 7 as a water station, a
wash vessel must be inserted and
station 7 must be defined as a ‘tap
water’ or ‘fully-de-ionized water’
station (DI water station) in ‘stations
options’. (see also
Chapter 5.5.3 )