Leica Biosystems ASP300 S - Manual (Page 39)

40 Leica ASP300 S
SECURITY
Access rights to the instrument are managed here as
user profiles.
SUPERVISOR MODE: Enabled or Disabled
Enabled - There are two different user profiles.
A password is required for supervisor level access to the
in- strument. Enabling SUPERVISOR MODE already requires
entering the password.
5.1.2 Access levels
The Leica ASP300 S may be configured to allow two levels of user access.
Operator access level:
• Operators may run programs and view results. On this level, the OPERATOR
symbol is displayed in the upper right corner of the touchscreen; all enabled
buttons are surrounded by a black border.
Supervisor access level:
• Supervisors may perform all Operator functions, and additionally create
programs and perform the initial operation functions.
In supervisor mode, the SMART SCREEN menu displays a status bar with
information about the retort and the wax baths (see Fig. 53 )
• To access Supervisor level, press SUPERVISOR,enter the required pass-
word and confirm. After you enter the password, the SUPERVISOR sym-
bol appears in place of OPERATOR, the outlining of all active buttons
changes from black to blue, the SUPERVISOR button is replaced by the
OPERATOR button.
"Operator" symbol
"Supervisor" symbol
→
Disabled - Default state of the instrument. All instrument and software
functions of the ASP300 S are fully accessible to all staff.
Fig. 29
5. Operation
Supervisor mode is disabled in factory condition.