JUMO 706585 LOGOSCREEN fd Operating Manual - Manual (Page 188)

26 Configuration - Time server (SNTP)
188
26.2 Synchronize with server ... period
Overview
Synchronize
with server The parameter determines if synchronization over SNTP is active.
Server A maximum of 3 servers can be indicated. The user can enter a server (DNS
name) or an IP address. Entry of the server name is the preferred option.
The 3 servers are queried from top to bottom – as a result, the second server is
only queried if the first one is not accessible, etc. If no sever can be reached,
the "Time server error" message will be entered into the event list. Synchroni-
zation will be attempted again in the next rhythm.
Period Period defines in which intervals the time of the paperless recorder will syn-
chronize with the external server.
The following settings are possible:
• 1 hour
• 12 hours
• 24 hours
Yes SNTP is active.