JUMO 706585 LOGOSCREEN fd Operating Manual - Manual (Page 100)

9 Parameterization
100
9.2 Counters/integrators
With the aid of this function, the present counter and integrator states can be
altered (for instance, to 0 or any start value). The alteration is documented in
the event list whereby the old and the new values are specified. It is effective
only once.
9.3 Date and time
Using this function, the current date and current time are set for the recorder.
Additional functions for configuring date and time functions (e.g. daylight
saving time) can be found in the menu Configuration
 Date and time and in
the menu Configuration  Time server (SNTP).
v Chapter 25 "Configuration - Date and Time"
v Chapter 26 "Configuration - Time server (SNTP)"