JUMO 706585 LOGOSCREEN fd Operating Manual - Manual (Page 185)

185
25 Configuration - Date and Time
25.2 Start Daylight Saving
When daylight saving time starts, the time is brought forwards by one hour.
Overview
Month The month in which daylight saving time starts is selected here.
Day in current
month This parameter is only available if a weekday has been configured in the “Day”
parameter. In conjunction with “Day”, this sets which weekday in that month
starts daylight saving time.
Example:
Month = March
Day of the month = last
Day = Sunday
Time = 02:00 AM
So the changeover to daylight saving time takes place at 02:00 on the last
Sunday in March.
Day This parameter defines the day of the month on which daylight saving time
starts.
Time The time at which daylight saving time starts is set here.
Sunday —
Saturday The weekday on which daylight saving starts.
The “Day of the month” parameter also has an effect.
1 — 31 The day (date) on which daylight saving time starts.
H
There is no validity check for the daylight saving time setting.
Please check that the entry is correct.