22 configuration - interface – JUMO 706585 LOGOSCREEN fd Operating Manual User Manual
Page 163
163
22 Configuration - Interface
network.
The automatically assigned IP address can be read in the menu Device
manager
Device info
Eth. Info (Chapter 8.3 "Device information").
IP address
If automatic IP address assignment is not used (DHCP = OFF), then the IP
address for the paperless recorder is set here.
Subnet mask
If automatic IP address assignment is not used (DHCP = OFF), then the subnet
mask is set here.
The subnet mask is used to gather devices (PC, recorders etc.) together to
form subnets. All devices that have an IP address that is AND linked to the
subnet mask belong to one subnet and can communicate with one another.
If it is necessary to access devices outside the subnet, then the
communication must be handled by a gateway (standard gateway).
Standard
gateway
If automatic IP address assignment is not used (DHCP = OFF), then the
address of the standard gateway is set here.
The standard gateway is used for communication with devices that do not
belong to the subnet.
Modbus port
no. TCP
The port address must be set for access to the paperless recorder and
Modbus TCP protocol with visualization software is used (Modbus tunneling:
outer frame Ethernet, inner frame Modbus).
v Further information can be obtained from the Operating manual
B 706585.2.0
DNS
device name
The DNS device name is set here. This makes it possible to access the device
not only through its IP address, but also through its name.
DNS server
This is used to set up the IP address for a DNS server that is installed in the
network. The DNS server is required to resolve the name for e-mail transfer via
Ethernet.
Transfer rate
Here you can configure the transfer rate that is used for communication
between the paperless recorder and the DHCP server or other computers.
Web server
The paperless recorder has an integrated web server to operate the instrument
via the Ethernet interface.
H
An assigned address can be altered by the DHCP server. If, for
example, the PCA Communication Software (PCC) is used for the
automatic collection of data, then the address must be altered
within the software.