JUMO 706585 LOGOSCREEN fd Operating Manual - Manual (Page 142)

18 Configuration - Groups
142
18.8 Timed Mode
Overview
Start Start time for initiating timed operation.
If start = end, then timed operation is not active.
End Stop time for terminating timed operation.
If start = end, then timed operation is not active.
Stored values
(memory
values)
v Chapter 18.6 "Normal Operation" - Page 139
Storage cycle
(memory rate)
v Chapter 18.6 "Normal Operation" - Page 140
Eco mode The parameters for Eco mode are set in the menu Normal operation.