JUMO 706585 LOGOSCREEN fd Operating Manual - Manual (Page 171)

171
23 Configuration – Batches/Plants
23.1 General Information on Batches
Batch reporting enables the creation of a flexible form to describe a batch
process within the paperless recorder. A maximum of three batches (for
3
plants) can be recorded at the same time.
The control (start, stop) of the batch reports can be performed by one of the
binary signals (control signals), by the control knob, or by a barcode reader.
For additional information on the digital signals, see
v Chapter 2.7 "Binary Signals"
For additional information on control by a barcode reader, see
v Chapter 4.9.3 "Batch Control with Barcode Reader"
Two different screen presentations are available for batch reporting: The
following are available:
• current batch report and
• completed batch report
H
Please note the relationship between group and plant (batch).
v Chapter 3.3 "Group and Plant Management (Batches)"
H
v The visualization of batches (in progress and completed) is
described in Chapter 4.9 "Batches/Plants".