JUMO 706585 LOGOSCREEN fd Operating Manual - Manual (Page 186)

25 Configuration - Date and Time
186
25.3 End Daylight Saving
When daylight saving time ends, the time is put back one hour.
Overview
Month The month in which daylight saving time ends is selected here.
Day in current
month This parameter is only available if a weekday has been configured in the “Day”
parameter. In conjunction with “Day”, this sets which weekday in that month
ends the daylight saving time.
Example:
Month = October
Day of the month = fourth
Day = Sunday
Time = 03:00 AM
So daylight saving time will end at 03:00 on the fourth Sunday in October.
Day This parameter defines the day of the month on which daylight saving time
ends.
Time The time at which daylight saving time ends is set here.
Monday —
Sunday The weekday on which daylight saving time ends.
The “Day of the month” parameter also has an effect.
1 — 31 The day (date) on which daylight saving time ends.
H
There is no validity check for the daylight saving time setting.
Please check that the entry is correct.