Declaration of conformity – INFICON MDC-360C Thin Film Deposition Controller User Manual
Page 5
DECLARATION
OF
CONFORMITY
This is to certify that this equipment, designed and manufactured by:
INFICON Inc.
Two Technology Place
East Syracuse, NY 13057
USA
meets the essential safety requirements of the European Union and is placed on the market accordingly. It
has been constructed in accordance with good engineering practice in safety matters in force in the
Community and does not endanger the safety of persons, domestic animals or property when properly
installed and maintained and used in applications for which it was made.
Equipment Description:
MDC-360C Thin Film Deposition Controllers, including the SO-100
Oscillator Package.
Applicable Directives:
73/23/EEC as amended by 93/68/EEC (LVD)
89/336/EEC as amended by 93/68/EEC (EMC)
2002/95/EC
(RoHS)
Applicable Standards:
EN 61010-1:2001 (Safety)
EN 61326-1:1997/A1:1998/A2:2001, Class A: Emissions per Table 3
Immunity per Table A.1
Due to the classification of this product it is currently exempt from the RoHS
directive.
CE Implementation Date:
November 1, 2007
Authorized Representative:
Duane H. Wright
Quality Assurance Manager, ISS
INFICON
Inc.
ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE SAFETY OF INFICON'S PRODUCTS SHOULD BE DIRECTED,
IN WRITING, TO THE QUALITY ASSURANCE DEPARTMENT AT THE ABOVE ADDRESS.
10/01/07