Flint & Walling CPJS Shallow Well - Manual (Page 12)

12
PUMP TO PRESSURE TANK CONNECTION (DISCHARGE PIPE)
Deep Well Application Only:
1. To begin the connection to the pressure tank, loosely
assemble flow control body to pump head. Using
Teflon tape, position the discharge outlet of the control
body facing right as you look directly into the face of
the pump
IL1388
Control
Body
Flow
Control
Screw
1
IL1389
2
IL1390
3
3. Tighten flow control body. (Fig. 3)
2. Assemble the pressure switch in the 1/4” tapping
adjacent and to the right of the discharge outlet of
the control valve (Fig. 2). Refer to Pump Electrical
Connection section for pressure switch wiring.
4. Install optional pressure gauge in 1/4” tapping on side
of pump body. Face of gauge should be positioned so
that dial can be read easily (Fig. 4).
IL1391
3