Flint & Walling P07EC24 Single Tank Water Softener - Manual

OWNERS GUIDE TO INSTALLATION
AND OPERATION
Fully Automatic
Water Softeners
SINGLE TANK
CABINET MODELS
TWO TANK MODELS
SAFETY INFORMATION
• Read the instructions carefully and learn the specific details regarding installation and use. Failure to follow them
could cause serious bodily injury and/or property damage.
• Make certain the electrical outlet is grounded by having it checked by an electrician or by using a UL Listed Circuit
analyzer. Units are furnished with 3-prong grounded plugs to protect you against the possibility of electrical shock.
Do not under any circumstances remove the ground prong and never splice or cut the elec-
trical cord.
• The outlet must be within reach of the power cord. Do not use an extension cord. Extension cords that are too long
or too light do not deliver sufficient voltage to the unit and could present a safety hazard if the insulation were to
become damaged. The receptacle should be located four (4) feet above the basement floor to guard against the
possibility of immersion.
Disconnect power at the main electrical box before installing or servicing the unit. Do not
plug in unit or change fuses while standing on wet or damp surfaces and do not touch
any other metal surfaces while plugging in product or changing fuses. Do it with one (1)
hand while keeping the other hand free.
• Check to be sure your power source is capable of handling the voltage requirements of the unit. Plug into a
dedicated grounded receptacle which contains a fuse or circuit breaker of 20 amps or less.
• All water treatment installations must conform to local plumbing, electrical and sanitation codes. These codes are
established for your protection.
Install Water condItIoner In an area protected from floodIng, raIn, dIrect sunlIght, dust,
snoW and freezIng. the Warranty does not cover damage Incurred as a result of exposure to
Weather.
95 North Oak Street • Kendallville, IN 46766 • 800-545-2206
137198
FW0273
0410
Supersedes
0407