Flint & Walling 4 (10 cm) Stainless Commander S Series - Manual

135874C
Questions, problems, missing parts? Before returning, call our customer service department at
1-800-742-5044, 7:30 a.m.-5:00 p.m., EST, Monday-Friday.
IL0632
OWNERS GUIDE
TO INSTALLATION
AND OPERATION OF
1/2 - 5 HP,
5, 7, 10, 15,
19 & 27 GPM
4” SUBMERSIBLE
PUMPS
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at
1-800-742-5044, 7:30 a.m.-5:00 p.m., EST, Monday-Friday.
• NOTE: Pumps with the “UL” Mark and pumps with the “US” mark are tested to UL Standard UL778.CSA
certified pumps are certified to CSA Standard C22.2 No. 108. (CUS)
SAFETY INFORMATION
dANGER
Always disconnect power source before performing
any work on or near the motor or its connected load. If
the power disconnect is out of sight, lock it in the open
position and tag to prevent unexpected application of
power.
Do not handle a pump or pump motor with wet hands
or when standing on a wet or damp surface or in
water. Disconnect main power before handling unit for
ANY REASON!
These pumps have not been investigated for use in
swimming pool areas.
Can shock, burn or cause death. Ground pump
before connecting to power supply.
The pump is intended for use in a well. Motor frame
must be connected to power supply ground or fatal
electrical shock may result.
NEVER leave fused disconnect switch or pressure
control switch cover or covers open (either partially or
completely) when not being worked on by a qualified
electrician or repairman.
FW0080
0314
Supersedes
0812