EUCHNER MGB-LxxB-PNx-xxx (PROFINET) with Data Structure Type B - Manual (Page 32)

Operating Instructions Safety System MGB-L..B-PN.-... (PROFINET)
32
Data block for enabling switch function (optional)
Function Slot
Required memory in data range of the control system (IO controller)
(Refer to the data sheet of your device for the exact bit allocation)
Enabling switches
V 4 2 C D 1 X 2 C D 2 X
X14
For slot assignment, see data
sheet
Input range
(1 byte)
Function Holder
+ but-
ton
- button - - - - Enabling
Bit I0.7 I0.6 I0.5 I0.4 I0.3 I0.2 I0.1 I0.0
Output range
(1 byte)
Display - - - - - -
- button
LED
+
button
LED
Bit O0.7 O0.6 O0.5 O0.4 O0.3 O0.2 O0.1 O0.0
Bit allocation
Input range
Bit Description
Output range
Bit Description
I0.0 Enabling switch in "enabling" position (signaling contact) O0.0 Enabling switch illumination for + button
I0.1 n.c. O0.1 Enabling switch illumination for - button
I0.2 n.c. O0.2 n.c.
I0.3 n.c. O0.3 n.c.
I0.4 n.c. O0.4 n.c.
I0.5 Enabling switch + button O0.5 n.c.
I0.6 Enabling switch – button O0.6 n.c.
I0.7 Enabling switch stop detection O0.7 n.c.
Data block for operating mode selector switch function (optional)
Function Slot
Required memory in data range of the control system (IO controller)
(Refer to the data sheet of your device for the exact bit allocation)
Operating mode selector
switch
For slot assignment, see
data sheet
Input range
(1 byte)
Switch (coding 2
from 3)
- - - - - S91
Bit I0.7 I0.6 I0.5 I0.4 I0.3 I0.2 I0.1 I0.0
Output range
(1 byte)
Display - - - - - - - -
Bit O0.7 O0.6 O0.5 O0.4 O0.3 O0.2 O0.1 O0.0
Bit allocation
Input range
Bit Description
Output range
Bit Description
I0.0 Operating mode selector switch bit 1 O0.0 n.c.
I0.1 Operating mode selector switch bit 2 O0.1 n.c.
I0.2 Operating mode selector switch bit 3 O0.2 n.c.
I0.3 n.c. O0.3 n.c.
I0.4 n.c. O0.4 n.c.
I0.5 n.c. O0.5 n.c.
I0.6 n.c. O0.6 n.c.
I0.7 n.c. O0.7 n.c.