EUCHNER MGB-LxxB-PNx-xxx (PROFINET) with Data Structure Type B - Manual (Page 17)

Operating Instructions Safety System MGB-L..B-PN.-... (PROFINET)
17
Mounting
Warning!
Mounting must be performed only by authorized personnel.
With two-wing hinged doors, one of the two door wings additionally must be latched
mechanically.
Use a rod latch (Item) or a double-door lock (Bosch Rexroth) for this purpose, for
example.
Tip!
The color and labeling of pushbuttons and indicators can be modified.
At least two M6 screws each must be used to install the evaluation module and
the handle module (tightening torque 4 Nm).
For installation steps see Figure 9.
Install system so that
ÌOperation of the mechanical release as well as inspection and maintenance are
possible.
ÌThe locking screw of the escape release must be returned to its original posi-
tion and sealed before putting into operation (for example with sealing lacquer).
Mounting color cover
1 2
2 3
90°
Click!
1
Mounting
Removing
Color cover