EUCHNER MGB-LxxB-PNx-xxx (PROFINET) with Data Structure Type B - Manual (Page 29)

Operating Instructions Safety System MGB-L..B-PN.-... (PROFINET)
29
Data blocks for MGB modules
All standard functions of an MGB module are combined in these data blocks. Ad-
ditional functions, e.g. an optional enabling switch or an optional stacklight, have
separate data ranges (see section “Data blocks of individual functions at a glance”
on page 31)
Data block for MGB bus module
MGB module Slot
Required memory in data range of the control system (IO controller)
(Refer to the data sheet of your device for the exact bit allocation)
Bus module
(configuration example)
S91
H90
S92
Data
Data
Link
SF
BF
ON
B U
1
1
2 Link
2
V 4 2 C D 1 X 1 N P 4 X V 4 2 C D 2 X 2 N P 3 X
For slot assignment, see data sheet
Input range
(2 bytes)
Switch S97 S96 S95 S94 S93 S92 S91 S90
Bit
I0.7 I0.6 I0.5 I0.4 I0.3 I0.2 I0.1 I0.0
I1.7 I1.6 I1.5 I1.4 I1.3 I1.2 I1.1 I1.0
Output range
(1 byte)
Display H97 H96 H95 H94 H93 H92 H91 H90
Bit O0.7 O0.6 O0.5 O0.4 O0.3 O0.2 O0.1 O0.0
Bit allocation for 1st byte
Input range
Bit Description
Output range
Bit Description
I0.0 Depends on your configuration variant (refer to the data
sheet of your device for the exact bit allocation)
O0.0 Depends on your configuration variant (refer to the data
sheet of your device for the exact bit allocation) I0.1 O0.1
I0.2 O0.2
I0.3 O0.3
I0.4 O0.4
I0.5 O0.5
I0.6 O0.6
I0.7 O0.7
Bit allocation for 2nd byte
Input range
Bit Description
I1.0 Depends on your configuration variant (refer to the data
sheet of your device for the exact bit allocation) I1.1
I1.2
I1.3
I1.4
I1.5
I1.6
I1.7