Enerpac PL-Series User Manual
Enerpac Tools
L2057
Rev. O
1/96
IMPORTANT RECEIVING INSTRUCTIONS
Visually inspect all components for shipping damage. If any shipping damage is found,
notify carrier at once. Shipping damage is
NOT
covered by warranty. The carrier is
responsible for all repair or replacement cost resulting from damage in shipment.
DESCRIPTION
These pull cylinders are designed to push/pull in a straight direction with no
side loading. Single- and double-acting models are available in most capacities. Plunger
bolts are not supplied with cylinders. Plunger bolts must be quality Grade 8
(8.8 DIN 912).
®
PRODUCTION AUTOMATION
Instruction Sheet
Pull Cylinders -- Metric
Model Number Code
1
2
3
4
5
6
optional
P = pull
cylinder
T = threaded body
U = upper flange
L = lower flange
S = straight
S = single-acting
D = double-acting
2 = 2,2 kN
5 = 5,6 kN
9 = 9,0 kN
35 = 35,0 kN
2 = metric
V = Viton
Upper Flange
Lower Flange
Threaded Body
CONTENTS
ENGLISH ............................................ 1 - 8
DEUTSCH ......................................... 12-15
FRANCAIS........................................ 16-19
ESPAÑOL ......................................... 20-23
ITALIANO ........................................ 24-27
NEDERLANDS................................. 28-31