Enerpac CDT-Series - Manual

POWERFUL SOLUTIONS. GLOBAL FORCE.
Index:
English: . . . . . . . . . . . . . . . . . . . . 1-8
Français: . . . . . . . . . . . . . . . . . . 9-16
Deutsch: . . . . . . . . . . . . . . . . . 17-24
Italiano: . . . . . . . . . . . . . . . . . . 25-32
Español: . . . . . . . . . . . . . . . . . 33-40
Nederlands: . . . . . . . . . . . . . . 41-48
Portuguese . . . . . . . . . . . . . . . 49-56
Japanes . . . . . . . . . . . . . . . . . 57-64
Repair Parts Sheets for this product are
available from the Enerpac web site at
www.enerpac.com, or from your nearest
Authorized Enerpac Service Center or
Enerpac Sales office.
1.0 IMPORTANT RECEIVING
INSTRUCTIONS
Visually inspect all components for
shipping damage. Shipping damage is not
covered by warranty. If shipping damage is
found, notify carrier at once. The carrier is
responsible for all repair and replacement
costs resulting from damage in shipment.
SAFETY FIRST
2.0 SAFETY ISSUES
Read all instructions, warnings
and cautions carefully. Follow
all safety precautions to avoid personal
injury or property damage during system
operation. Enerpac cannot be responsible
for damage or injury resulting from unsafe
product use, lack of maintenance or
incorrect product and/or system operation.
Contact Enerpac when in doubt as to the
safety precautions and operations. If you
have never been trained on high-pressure
hydraulic safety, consult your distribution or
service center for a free Enerpac Hydraulic
safety course.
Failure to comply with the following cautions
and warnings could cause equipment
damage and personal injury.
A CAUTION is used to indicate correct
operating or maintenance procedures
and practices to prevent damage to, or
destruction of equipment or other property.
A WARNING indicates a potential danger
that requires correct procedures or practices
to avoid personal injury.
A DANGER is only used when your action
or lack of action may cause serious injury
or even death.
Instruction Sheet
CST, CDT, and CSM Threaded Cylinders
L2574 Rev. B 03/10