Det-Tronics R7495D UV/IR Flame Detection System - Manual (Page 26)

The following options can be substituted for the item in
bold:
1
or: “in a 316 stainless steel enclosure.”
2 or: “25 mm”
3
or: “flame-proof for EEx d IIB. The device shall
be rated IP66 (dust-tight/water-tight). The
detector shall be BASEEFA/CENELEC certi-
fied.”
or: “explosion-proof for Class I, Division 1,
Groups C and D; Class II, Division 1, Groups E,
F and G. The device shall be rated NEMA 4
(dust-tight, watertight). The detector shall be
CSA certified.
ORDERING INFORMATION
When ordering, specify:
— R7495D Controller
— C7052J Detector
— Number detectors needed
— Detector housing materials
Anodized copper-free aluminum
316 stainless steel
— Approvals required
FM
CSA
BASEEFA/CENELEC
ACCESSORIES
— Q4004 Mounting Cage accommodates eight mod-
ules (Controllers) and fits standard 19-inch instru-
ment rack. Smaller sizes are available.
— Filler panels for empty spaces in the Q4004
Mounting Cage
— 000507-XXX power supplies
— Cover locking assembly
— Q1113 Air Shields
— W867 UV/IR Test Lamp
— W8067 Long Range Test Lamp
— Q9001G Swivel Assembly
RECOMMENDED SPARE PARTS
Description Part Number Quantity
UV oi rings 002519-001 2 per 10 detectors
IR oi rings 003525-001 2 per 10 detectors
UV Sensor Module DE1888 1 per 10 detectors
IR Sensor Module 003895-001 1 per 10 detectors
(plug-in)
003895-002 1 per 10 detectors
IR Sensor Module 005500-001 1 per 10 detectors
(wire harness)
Junction box 004432-001 1 per 10 detectors
circuit board
O-rings 107427-004 4 per 10 detectors
Grease 005143-001 1 per 10 detectors
(silicone-free)
Window Cleaner Kit 001680-001
(six bottles)
APPLICATION ASSISTANCE
For assistance in ordering a system to fit your applica-
tion, please contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator: (952) 941-5665 or (800) 765-FIRE
Customer Service: (952) 946-6491
Fax: (952) 829-8750
Web site: www.detronics.com
E-mail: [email protected]
2 6