beautypg.com

Technical specifications – Despatch LCC/LCD2-14-3 Non Pass Through Series User Manual

Page 76

background image

67

Technical Specifications

UL, cUL listed:

UL file E136675

CE compliance to:

EMC Directive 89-366/EEC
European Standard EN55011/1991
European Standard EN50082-2/1995

Power supply:

100 to 240 VAC +10% -15%, 50-60Hz, 30VA Maximum
12 to 24 VAC/VDC +/-10%, DC to 60Hz, 30VA Maximum

Temperature:

Storage -20 to 60°C
Operating 0 to 50°C

Humidity:

90% or less, non-condensing

Sensor inputs:

Type J thermocouple -73°C to 760°C (-100°F to 1400°F)
Input impedance 1M ohm or greater
Common mode noise rejection of 140db@60Hz
Common mode input voltage of +/-12.0VDC
Sample rate of at least 1 sample per second
Stability of +/- 0.5°C per 5°C change in ambient temperature
Repeatability of +/- 0.5°C, or +/-0.1% of sensed temperature (whichever is

greater)

Accuracy (@ 77°F +/-0.2 percent of span (+/-3°F)
Supply Voltage Influence of +/-0.5°C per 10% change in nominal line voltage

Temperature
display:

1 degree resolution (C or F)
Accuracy after calibration of +/- 1°C, or +/-0.2% of sensed temperature

(whichever is greater) @25°C

Four-digit seven-segment LCD, 0.43 inches high (11mm)
Readout Stability (+/-1°F/10°F Change in ambient temperature)

Message display:

Two-line, 16 alpha-numeric 5x7 dot matrix characters per line
0.2 inches high (5mm)

Time base:

+/- 4 seconds accuracy in 24 hours

Heat control
output:

SSR Drive 24VDC nominal @ 70mA

Relay output: (plug-in
module)

Form A dry contact, rated 3 amps @ 24-264VAC

Retransmit output:

1 to 5 VDC into > 100K ohm load

Communications:
(plug-in module)

RS232 Single drop, isolated
RS422 Multi-drop, isolated
RS485 Multi-drop, isolated

Remote inputs:
(plug-in module)

Dry-contact closure type with less than 250 ohm ON resistance

Front panel:

NEMA 4X (with gasket)

Dimensions:

3.57H x 7.24W x 2.84D inches (91H x 184W x 72D mm)

Panel opening:

3.63H x 7.30W inches (92H x 185W mm)