Despatch LCC/LCD2-14-3 Non Pass Through Series - Manual (Page 12)

3
SPECIFICATIONS
Electrical Specifications
If your line voltage is much lower than the oven voltage rating, heat up time is
significantly longer and motors may overload or run hot. If your line voltage is higher
than the nameplate rating, the motors may run hot and draw excessive amps. If the line
voltage varies more than 10% from the oven voltage rating, some electrical components
such as relays, temperature controls, etc. may operate erratically. Power connection is
performed by the user.
VOLTS AMPS PHASE HERTZ HEATER
208 50.5 3 50/60 16 kW
240 44.5 3 50/60 16 kW
380 21.6 3 50 12 kW
415 25.2 3 50 16 kW
480 22.2 3 60 16 kW
NOTE that this oven is not intended to process solvents or other volatile or
flammable materials unless the “Class A” option is ordered. The oven’s forced
exhaust is intended for cooling purposes ONLY on standard and inert
(nitrogen) models.
WARNING: Failure to heed warnings in this instruction manual and on the oven
could result in personal injury, property damage or death.
WARNING: Do not use any flammable solvent or other flammable material in this
oven. Do not process closed containers of any substance or liquid in this oven
because they may explode under heat.
WARNING: Do not use the oven in wet, corrosive or explosive atmospheres unless
this oven is specifically designed for a special atmosphere.