Despatch LCC/LCD2-14-3 Non Pass Through Series - Manual (Page 11)

2
Features
Despatch Protocol Plus microprocessor-based digital programmable control, with
simultaneous digital readout of both setpoint and actual temperatures.
CE and SEMI S2 compliance, including yellow and red disconnect switch/EMO
mounted in the front control panel door.
Manual reset high-limit control.
Proportioning temperature control using solid state relays.
Four (4) inches of insulation minimizes heat loss, external thermal spots and air
leakage.
Stainless steel exterior and interior, with all interior seams continuously welded
on the insulation side to protect the work chamber from contamination and to
permit chamber cleaning without damaging insulation.
Horizontal airflow, which achieves air temperature uniformity of +/- 1% of
operating temperature.
Recirculation motor is mounted in the machinery compartment underneath the
oven, providing convenient access.
Electrical door lock prevents operator from opening chamber door when cycle is
in process. The door lock is de-energized at the end of a cycle or when power is
off.
Options
Beacon light option on control panel provides visual cycle process indication to
operator (red/amber/green)
High-limit alarm/alarm silence switch option
Oven door switch option for fans
Recorder option
Modbus RS422/485 communications option to Protocol Plus controller