Dascom MIP480 User Guide - Manual (Page 65)

Using Special Mode
4-31
Setting Setup Mode to Default Value (Standard)
This function can initialize the printer to Standard default.
1 To enter setting setup mode to default value (standard):
a) Turn the printer off.
b) Turn the printer back on while simultaneously pressing the “PARK” + “READY/
CLEAR” keys.
2 Exit the setting setup mode to default value (standard):
After the setting completes, the printer will automatically restart in the power-up state.
Setting Setup Mode to Default Value (6820 Mode)
This function can initialize the printer to 6820 mode default.
1 To enter setting setup mode to default value (6820 mode):
a) Turn the printer off.
b) Turn the printer back on while simultaneously pressing the “PARK” + “ALT” keys.
2 Exit the setting setup mode to default value (6820 mode):
After the setting completes, the printer will automatically restart in the power-up state.
NOTE: Do not press any keys alone or in combination, except for pressing the PARK
and READY/CLEAR keys simultaneously, when turning the printer on, to avoid
initiating unexpected tests not permitted for the user.
NOTE: Do not press any keys alone or in combination, except for pressing the PARK
and ALT keys simultaneously, when turning the printer on, to avoid initiating
unexpected tests not permitted for the user.