Removing single sheets, Removing printed pages – Dascom MIP480 User Guide User Manual

Page 33

Text mode
Original mode

Printing

3-3

Removing Printed Pages

This section describes the best methods for removing single sheets or continuous forms
paper after printing.

Removing Single Sheets

When you print using software, the printer automatically ejects each sheet of paper when
the end of the printed page is reached. To eject sheets manually:

•

Press the FF/Load key to execute a form feed.

If you have set the TEAR option to MANUAL, use the READY key to control the Tear-Off
function.

NOTE: Proper use of the Tear-off function requires the paper be positioned at Top of

Form either by software command (form Feed) or by pressing the FF/Load
key.

NOTE: See the section “Tearing Off Continuous Forms” in Chapter 2, “Paper

Handling”.