Dascom MIP480 User Guide - Manual (Page 15)

Paper Handling
2-7
Selecting Paper
The printer can handle either single sheets or continuous forms. Single sheets, also
called cut sheets, include envelopes and non-continuous, multipart forms. Continuous
forms include labels and multipart forms fed into the printer using the forms tractors.
For best results, use paper that meets the specifications listed in the following table. (See
Appendix B, “Printer and Paper Specifications,” for detailed specifications.) If you are
unsure of the suitability of a particular type of paper, try testing the paper or consult your
dealer.
Paper Specifications
Paper Size
Paper Thickness and Number of Copies
Parameter Fixed Unit Portable Unit
Width -- Cut Sheet 102 to 267 mm 102 to 248 mm
Width -- Fan-Fold 102 to 216 mm 102 to 216 mm
Length 102 mm or greater 102 to 279 mm
Thickness Up to 0.35 mm Up to 0.35 mm
Description
Thickness 0.35 mm (0.014 in) maximum total thickness.
Copies 1 to 3 copies, including the original. For carbon-inter-
leaved paper, the carbon counts as a copy.