Dascom MIP480 User Guide - Manual (Page 50)

Using Special Mode
4-16
INSTALL Options and Values
• Overprinted values are the factory settings.
INSTALL Options Values Description
Specify a language to be used to print the
Set-Up menu functions and options.
ENGLISH English
DEUTSCH German
ESPANOL Spanish
FRANCAIS French
ITALIANO Italian
Specify the (auto) start timing of tear off feed-
ing.
AUTO 1 SEC 1 second after data stops from the computer
AUTO 2 SEC 2 seconds after data stops from the computer
AUTO 3 SEC 3 seconds after data stops from the computer
AUTO 4 SEC 4 seconds after data stops from the computer
AUTO 5 SEC 5 seconds after data stops from the computer
MANUAL Feed the paper for tear-off when the READY
key is pressed changing to pause mode.
NO TEAR Tear off feeding is inhibited under any condi-
tions.
Specify the (auto) start timing of single sheet
loading.
AUTO 1 SEC 1 second after a single sheet is set on the
platen
AUTO 2 SEC 2 seconds after a single sheet is set on the
platen
AUTO 3 SEC 3 seconds after a single sheet is set on the
platen
AUTO 4 SEC 4 seconds after a single sheet is set on the
platen
AUTO 5 SEC 5 seconds after a single sheet is set on the
platen
MANUAL Load a single sheet when the FF/Load key is
pressed.
Assign buffer memory as the input buffer.
2 KBYTE 2K bytes
8 KBYTE 8K bytes
16 KBYTE 16K bytes