Dascom MIP480 User Guide - Manual (Page 111)

Command Sets
C-17
Function Command
Page Formatting
Set right margin to column n
ESC Q (n)
(1 ≤ n ≤ 255)
Set left margin to column n ESC l (n)
(0 ≤ n ≤ 255)
Set top and bottom margins from top of page ESC ( c (n1) (n2) (t1) (t2) (b1) (b2)
n1 = 4, n2 = 0
• Top margin = (t1 + t2 X 256)/360(*1) inch
(0
≤ t1 ≤ 255) (0 ≤ t2 ≤ 127)
• Bottom margin =(b1 + b2 X 256)/360(*1)i nch
(0 ≤ b1 ≤ 255)
(0 ≤ b2 ≤ 127)
Set perforation skip by n lines ESC N (n)
(1 ≤ n ≤ 127)
Perforation skip off ESC O
Set page length to n lines (1 ≤ n ≤ 127) ESC C (n)
Set page length to n inches (1 ≤ n ≤ 22) ESC C NUL (n)
Set page length to (d1 + d2 X 256)/360(*1) inch ESC ( C (n1) (n2) (d1) (d2)
n1 = 2, n2 = 0
(0
≤ d1 ≤ 255) (0 ≤ d2 ≤ 127)
Character Set Control
Select character set 1
ESC 7
Select character set 2 ESC 6
Select the active character set assigned with the ESC t (n)
ESC (t command (0 ≤ n ≤ 3)
*1 The value depends on the pitch set by the ESC (U command. The default is 1/360 inch.