Dascom MIP480 User Guide - Manual (Page 114)

Command Sets
C-20
Function Command
• n1 and n2 set point size of font.
Point size = (n1 + n2 X 256) X 0.5 point
(0 ≤ n1 ≤ 255) (0 ≤ n2 ≤ 127)
Copy resident character set to download area ESC : NUL (n) (s)
Create download font ESC & NUL (n1) (n2) (d0) (d1)
(d2) (data)
Bit Image Graphics
Graphics type m graphics
ESC * (m) (n1) (n2) (data)
Bit image mode definition ESC ? (s) (n)
Single-density graphics ESC K (n1) (n2) (data)
Double-density graphics ESC L (n1) (n2) (data)
High-speed double-density graphics ESC Y (n1) (n2) (data)
Quadruple-density graphics ESC Z (n1) (n2) (data)
Select raster image graphics ESC ( G (n1) (n2) (d)
n1 = 1, n2 = 0
d = 1: Raster image graphics mode
Print raster image graphics ESC . (c) (v) (h) (m) (n1) (n2) (data)
Barcode
Barcode setup and print
ESC (B (n1) (n2) (k) (m) (s) (v1) (v2)
(c) (data)
(0 ≤ n1, n2 ≤ 255) (n = n1 + n2 X 256)
k: Barcode type
k Barcode type
k value barcode type
00 hex
01 hex
02 hex
03 hex
04 hex
05 hex
06 hex EAN-13
EAN-8
INDUSTRIAL 2 OF 5
UPC-A
UPC-E
CODE 39
CODE128
m: Module width
m Module width
m unit module dots
02 hex
03 hex
04 hex 2 dots(default)
3 dots
4 dots
s: Space width adjustment
s Space width adjustment
“s” is used for fine adjustment for each “spaces” to match the optical conditions.
There is no effect for the “bar” width adjustment.
Range :-3≦s≦3