Dascom MIP480 User Guide - Manual (Page 54)

Using Special Mode
4-20
Using the Diagnostic Functions
Print Configuration Function
This function prints a list of all the printer’s currently selected values. This function is use-
ful for checking the printer settings when you first enter the Set-Up mode or just before
you exit.
1 To enter the Printer Configuration mode:
a) Make sure that the tractors are loaded with continuous feed paper and that the
paper select lever is set backward.
b) Turn the printer off.
c) Turn the printer back on while pressing the ALT key.
2 The printer starts to print a list of the currently selected values. The pre-selected fac-
tory settings are shown on the opposite page.
3 To exit the Printer Configuration mode: After the printer finishes printing the list of
values, press the SETUP/EXIT key.