Dascom MIP480 User Guide - Manual (Page 38)

Using Special Mode
4-4
Entering the Set-Up Mode
To enter the Set-Up mode:
1 Make sure that the tractors are loaded with continuous feed paper and that the paper
select lever is set backward.
2 Turn the printer off.
3 Turn the printer back on while pressing the READY key.
The initial printout contains a header, help menu 1, and menu 2. The
header tells you that the printer is in the Set-Up mode. The help menu provides a quick
summary of how to use keys in the Set-Up mode.
The menu 2 is started from MACRO.
Buttons Set-Up Action
NEXT Move cursor Down to the next Function or Value
PREVIOUS Move cursor Up to the next Function or Value
ALT-NEXT Select the Option or Value and Move cursor Right
ALT-PREVIOUS Select the Option or Value and Move cursor Left
SETUP/EXIT
Select the Option or value and Move to SAVE&EXIT
FUNCTIONS
MACRO
1
2