Dascom MIP480 User Guide - Manual (Page 35)

4-1
4
Using Special Mode
Your Mobile Printer has two operation modes:
• The Normal mode is used for daily operations like paper handling and printing as ex-
plained in Chapter 2, “Paper Handling," and Chapter 3, “Printing.”
• The Special mode is used to change the printer settings.
The following table summarizes the purpose of each function.
Special Mode Functions
Function Purpose
Setup Mode Change the Printer setting
Print Configuration Print the Printer Configuration
To check your settings by printing a list of all the printer’s cur-
rently selected values.
Printing Test Run the printing test
Hex Dump Mode Hex-dump allows you to determine whether the computer is
sending the correct commands to the printer
Printing Alignment Adjust-
ment Perform adjustment Bi-directional alignment
Top of Form Adjustment Perform adjustment of Top of Form
Setting of The First Dot Posi-
tion on The Left Side Change the left margin fine adjustment
Menu-Access Restricts access to Set-Up functions from the control panel
Setting Setup Mode to
Default Value (Standard) Resets factory settings in MACRO and INSTALL for standard
Setting Setup Mode to
Default Value (6820) Resets factory settings in MACRO and INSTALL for 6820