Dascom MIP480 User Guide - Manual (Page 45)

Using Special Mode
4-11
Macro Options and Values
• Values in bold are the factory settings.
• Some settings are overridden by commands from the computer.
• Options that differ by emulation are described at the end of the table.
MACRO Options Description
Select the same emulation as that selected by your soft-
ware.
EPSON-EP2 Epson printers using the EP2 emulation
IBM 2390+ IBM 2390+ printers
6820 6820 mode (Standard model doesn’t support this func-
tions)
PORT DEPEND The printer selects emulation according to the active inter-
face (such as serial, USB). See the next options.
Select an emulation for the Serial interface. This is invalid
and skipped when PORT DEPEND is not selected for the
option.
Epson-EP2 EP2 (factory setting)
IBM 2390+ IBM Proprinter 2390+ printers
6820 Not valid in Standard model
Select an emulation for USB interface. This is invalid and
skipped when PORT DEPEND is not selected for the
option.
Epson-EP2 EP2 (factory setting)
IBM 2390+ IBM Proprinter 2390+ printers
6820 Not valid in Standard model
Select an emulation for the Wireless interface. This is
invalid and skipped when PORT DEPEND is not selected
for the option.
Epson-EP2 EP2 (factory setting)
IBM 2390+ IBM Proprinter 2390+ printers
6820 Not valid in Standard model
Select an emulation for the Bluetooth interface. This is
invalid and skipped when PORT DEPEND is not selected
for the option.
Epson-EP2 EP2 (factory setting)
IBM 2390+ IBM Proprinter 2390+ printers
6820 Not valid in Standard model
Select a font to be active when the power is turned on. For
fixed-spaced fonts, be sure to change the horizontal pitch
as well.
DRAFT Draft font (lower resolution than letter quality, 3 times the
speed of letter quality)
COURIER Courier font