Dakota Ultrasonics PR-8V User Manual

Page 88

Dakota Ultrasonics

Note: The Name and Comments of the Setup can be edited at any time by

simply repeating the Save Setup routine described above. Therefore, the

Save Setup function can also be considered an Edit Function.

11.4 Using the Default Setup

The default setup feature was added to the PR-8V to use, as a last resort, if there are
no setups stored in the gauge –factory or otherwise. The only time this might
possibly occur is if the setup file in the PR-8V was somehow corrupted, and the user
does not have access to a computer to re-load the factory setups back into the PR-
8V. This gives the user the ability to load and modify a basic setup as follows:

Using the Default Setup

1) Press the MENU key once to activate the menu items tab. Press the MENU

key multiple times to tab right and the ESC key multiple times to tab left until

the SETUP menu is highlighted and displaying the submenu items.

2) Use the UP and DOWN arrow keys to scroll through the sub menu items

until DEFAULT SETUP is highlighted.

Press the ENTER key to load the Default Setup and display the Warning

Message Box.