beautypg.com

Dakota Ultrasonics PR-8V User Manual

Page 73

background image

PR-8V High Performance Thickness Gauge

69

3) Press the OK key to save the New Grid, or the ESC key to cancel the New

Grid setup and return to the DATA menu.

4) Press the MEAS key to return to the measurement screen and begin storing

readings.

10.4 Storing a reading

Now that a grid has been created, it’s time to make some measurements and store
the readings. The following procedures outline this process:

Storing a Reading

Note: In the photos above, the MEM format is set to GRID. However, if the

ENGINE format was selected, the COL would change to CYL#, and the ROW

would be displayed as CLK#.

1) Press the MEAS key once to activate measure menu items. Press the

MEAS key multiple times to move right and the ESC key multiple times to

move left until the either the COL or ROW cell is highlighted.