Dakota Ultrasonics PR-8V - Manual (Page 80)

Dakota Ultrasonics
76
10) Press the UP or DOWN arrow key to highlight SAVE CHANGES, and the
OK key to activate the confirmation screen.
11) Press the OK to save the changes or the ESC key to cancel editing the grid
parameters.
12) Press the MEAS key to return to the measurement screen.
10.8 Changing the active grid (File) - Open
The user may have transferred grid templates from a PC to the PR-8V, or setup grids
using the PR-8V at an earlier time. The name of the currently active grid is always
displayed at the bottom of the Hot Menu Items in measurement mode (refer to photo
below). It’s not only important to recognize what grid is currently active, but also be
able to change the active grid at any time. The following procedures outline this
process:
Changing the Active Grid