Dakota Ultrasonics PR-8V - Manual (Page 34)

Dakota Ultrasonics
30
Selected from a Setup
Important Note: Stored setups will save all the parameters of the PR-8V.
Therefore, if a transducer was selected in the previous section and a setup is
now being recalled, the transducer saved in the setup will overwrite the
transducer previously selected. Be sure the transducer saved with the setup is
the same as the transducer currently being used. Alternatively, you can select
a transducer again after recalling a setup. This will override the transducer
saved with the setup.
1) Press the MENU key once to activate the menu items tab. Press the MENU
key multiple times to tab right a nd the ESC key multiple times to tab left until
the SETUP menu is highlighted and displaying the submenu items.
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until OPEN is highlighted.
3) Press the ENTER key to display the list of stored setups.
4) Press the UP and DOWN arrow keys to scroll through the list of setups until
the appropriate setup is highlighted.
5) Press the ENTER key to display the confirmation screen.