Atop Technology SE5002D User manual - Manual (Page 85)

Atop Serial Device Server
SE5002D
User Manual V. 1.1
 Press any key to continue.
 An editor will open dapdl.cfg automatically. Edit the content to match the SE5002D ’s IP
address and the new firmware file name; “dapl.cfg” has the following structure.
Remote_IP 10.0.50.100
Load Firmware.hex
The first line identifies the SE5002D ’s IP address, the second line indentifies the firmware’s
name (.hex) to be downloaded.
Fig. 2
 File → Save to save the file.
 File → Exit to exit the text editor.
 Enter the admin as the user ID and the password for SE5002D. If a password is not set,
pres enter. The batch file will upgrade the system firmware. SE5002D will automatically
restart after the new firmware is uploaded.